A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Convertible Top Switch: Service and Repair
Convertible Top Switches
Convertible Top Switches
Removing
-
Store convertible top in convertible top compartment.
‹› The convertible top compartment cover remains open.
-
Remove front roof frame seal bolts.
-
Carefully remove front rail trim.
-
Remove ball joint wire fastener and press push rods from convertible top lock ball studs.
-
Disconnect electrical connector.
-
Mark exact position of convertible top latch on rail 1.
-
Remove convertible top latch bolts and remove latch.
Installing
-
Ensure convertible top latch is installed in the position marked earlier.
Further installation is performed in the reverse order of removal.
Tightening torques => [ Attachments Assembly Overview ] See: Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Attachments Assembly Overview.
Adjust convertible top latch => [ Convertible Top Lock, Checking and Adjusting ] See: Roof and Associated Components/Convertible
Top/Convertible Top Latch/Testing and Inspection.