A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Pull off backing paper from sealing pieces - 5 - and press seal over thread onto spoiler - 1 -.
-
Pull off backing paper on one side from adhesive tape - 2 - or - 4 -.
-
Press adhesive tape along circumference on spoiler as shown.
-
In rear area, adhesive tape - 4 - must be pressed on in radius.
-
Tighten nuts to 2 Nm when installing.
Vehicles in DTM and version
‹› It is not possible to remove the spoiler without damaging.