A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Replace O-ring seals - B - and - C -.
-
Install refrigerant pipes such that they are not strained.
-
After the refrigerant lines are attached, check grommet - E - and line bushing - F - for correct installation.
-
Check position of refrigerant pipes with respect to evaporator.
-
Check the type of seal at the connections and the refrigerant lines. These must be designed for the same type of seal. Refer to => [ Refrigerant Line
to Component Connections ]
-
Evacuate and re-charge refrigerant circuit.