A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Install in reverse order of removal, observing the following:
-
Check adjustment nut - 1 - of adjusting element for smooth running - arrows -.
-
Turn adjustment nut completely downward, but do not tighten.
-
Insert headlamp and install screws - 1 to 3 - two turns each.
-
Install front bumper cover.
-
Align headlamp according to contours of body and front bumper cover (gap dimension).
-
Tighten screws in sequence - 2 -, - 1 - and - 3 -.
‹› When tightening the bolts, the adjustment nut of the adjusting element turns automatically towards the location point of the headlamp housing and
locates it.
-
Check gap dimension, repeat headlamp installation if necessary.
-
Connect battery => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.