A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Turn bulb holder - 3 - counter-clockwise - arrow - and pull from housing.
-
Screw bulb out of holder.
Installing
Install in reverse order of removal, noting the following:
CAUTION!
‹› Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
‹› When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
-
Fit new bulb in housing.
-
Markings - 1 - and - 2 - must be opposite each other when inserting bulb holder into housing.
Left headlamp
-
Install washer fluid reservoir => [ Washer Fluid Reservoir, Audi A4/S4 ] See: Wiper and Washer Systems/Windshield Washer Reservoir/Service
and Repair/Washer Fluid Reservoir, Audi A4/S4.
Right headlamp
-
Install wheel housing liner.