A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Manifold Pressure/Vacuum Sensor: Service and Repair
Charge Air Pressure Sensor
Removing
-
Disconnect electrical harness connector - 2 - at Charge Air Pressure Sensor (G31).
-
Remove bolts and pull out Charge Air Pressure Sensor (G31) from charge air cooler.
‹› Ignore - 1 -.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace O-ring.
Tightening Specifications