A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Remove bolts - 2 -.
-
Disconnect coolant hoses - arrows - from coolant pipe.
-
Remove bolt - 1 - and remove coolant pipe.
Installing
Installation is in reverse order of removal, note the following:
‹› Always replace gaskets and seals.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Clean and/or smooth O-ring sealing surface before installing.
-
Moisten new O-ring with G12+ and push onto coolant pipe.
-
Install intake manifold.
-
Fill with coolant. Refer to => [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures.
Tightening Specifications