A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Navigation Module: Service and Repair
Navigation System II-D, Operating Electronics, Navigation Control Module
Navigation System II-D, Operating Electronics, Navigation Control Module
Special tools, testers and auxiliary items required
‹› Radio removal tool (T10057)
-
Turn off all electrical components.
-
Remove ignition key.
Removing
-
Place Radio Release Tool (T10057) in release slits on Operating Electronics, Navigation Control Module (J402) until they engage. Points on grip
eyes face outward.
-
Remove Operating Electronics, Navigation Control Module (J402) from instrument panel.
-
Release connectors on Operating Electronics, Navigation Control Module (J402) and remove it.
-
Remove Radio Release Tool (T10057) by pressing locking tabs on Radio (R).
Installing
-
Connect all harness connectors.
-
Carefully slide Operating Electronics, Navigation Control Module (J402) into instrument panel and allow it to engage in installation frame.
-
Perform adaptations and coding on Operating Electronics, Navigation Control Module (J402) if necessary.