A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-2439017.png)
-
Clip in brackets - 4 -, - 5 -, - 6 - and - 7 -.
-
Tighten bolt - 3 -. Refer to => [ (Item 3) Bolt ].
-
Engage side curtain airbag at threaded pins and tighten nut - 1 - by hand.
-
Tighten bolts - 2 -. Refer to => [ (Item 2) Screws, (Qty. 2) ].
-
Tighten bolts - 4 -, - 5 - and - 7 -. Refer to => [ (Item 4) Bolts (Qty. 3) ] and => [ (Item 5) Bolt ] and => [ (Item 7) Bolt ].
-
Tighten bolt - 6 -. Refer to => [ (Item 6) Bolt ].
-
Tighten nuts - 1 -. Refer to => [ (Item 1) Cap Nut ].
Installation is reverse of removal, noting the following:
-
Switch on ignition.
CAUTION!
No one should be in vehicle when connecting battery.
-
Connect the battery ground (GND) strap.
‹› Follow safety measures after connecting battery.
‹› If the Airbag Malfunction Indicator Lamp (MIL) ( K75) shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System ( VAS 5051 A), cleared and then rechecked.
