A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Open the guide clip - 8 -.
CAUTION!
Connectors - 3 - and - 7 - must not be separated.
-
Slide Seat Occupied Recognition Pressure Sensor ( G452) - 4 - sideways from retaining clip - 9 -.
2
Bolts
‹› 2.5 Nm
3
Connector on Seat Occupied Recognition Control Module (J706)
‹› Must not be separated under any circumstances.
4
Seat Occupied Recognition Pressure Sensor (G452 )
5
Pressure Hose
6
Connector Between Service Kit and Seat Wiring Harness
‹› deleted on the wiring routing modular => [ Modular Wiring Routing Versions ] See: Body and Frame/Seats/Description and Operation/Front
Seats
7
Connector on Seat Occupied Recognition Pressure Sensor (G452)
‹› Must not be separated under any circumstances.
8
Guide Clip
9
Retaining Bracket
Service Kit, Removing
‹› Seat removed
With Modular Wiring Routing
-
Open the corrugated tube. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] See: Body and Frame/Seats/Description
and Operation/Front Seats.
-
Remove the Service Kit wire from the corrugated tube. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] See: Body
and Frame/Seats/Description and Operation/Front Seats.
Procedure for all vehicles
-
Fold the cushion - 5 - upward.