A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Ride Height Sensor: Service and Repair
Rear Suspension
Vehicle Level Sensor
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
-
Dismount tire.
-
Remove bolt - 1 -.
-
Remove bolts - 2 - with angled wrench. Do not bend upper retaining plate when doing so.
Transverse link is not shown to improve clarity.
-
Adapt replacement part accordingly and install.
‹› Hold Level Control System Sensor securely when tightening screws - 2 -.
Tightening specifications:
Item 1: 10 Nm
Item 2: 5 Nm
-
After replacing, perform basic setting for headlamps.
-
Mount wheel and tighten.