A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Mark assignment of wires at threaded connections - 2 -, - 3 - and - 5 -.
-
Remove wires at threaded connections.
-
Remove bolt - 1 - and nut - 4 -.
-
Unclip fuse carriers at 4-position relay carrier.
-
Remove relays and control modules and then unclip appropriate relay carrier.
‹› Refer to the applicable wiring diagram for exact identification of connections on relay carrier => Wiring Diagrams.
Installing
Install in reverse order of removal, noting the following:
-
Install wires at threaded connections - 2 -, - 3 - and - 5 - according to markings.