A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
Trunk / Liftgate Switch: Service and Repair
Trunk Lid Contact Switch, Removing and Installing
Trunk Lid Contact Switch, Removing And Installing
Removing
-
Remove trunk lid lock.
-
Pry off plastic catch -3- from retaining bolts -1- using a flat screwdriver.
-
Bend plastic tab fully to rear.
-
Pull contact switch -2- first to the side and then upward out of trunk lid lock.
Installing
Installation is reverse of removal, paying attention to the following:
NOTE: Make sure that the washers between plastic catches and trunk lid lock have proper seating.