A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
-
Clipped in on fuel tank For Transfer Fuel Pump (FP) G6
-
Clipped into fuel delivery unit
7. Electrical harness connector
-
For Fuel level sensor G
-
For transfer Fuel Pump (FP) G6
8. Suction jet pipe
-
From fuel pump to suction jet pump
-
To disconnect, press release button on connection piece
9. Electrical harness connector
-
For Fuel Level Sensor 2 G169
10. Locking ring
-
Use wrench 3087 to remove and install
-
Tighten to 145 Nm
11. Oil seal
-
Replace
-
Install dry
12. Suction jet pump
-
Suction jet pump, checking
-
Removing and installing.
13. Fuel Level Sensor 2 G169
-
Resistance values, checking
-
Removing and installing.
14. Fuel delivery line
-
From suction jet pump to fuel delivery unit
-
Clipped into fuel delivery unit.