A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
Battery: Testing and Inspection
Electrolyte Density In All Cells, Checking
Electrolyte Density In All Cells, Checking
Special tools and equipment
-
Hydrometer, commercial type
WARNING:
-
Always pay attention to accident prevention regulations when handling electrolyte. Suitable protective clothing must be worn.
-
When disposing of batteries it is absolutely necessary that disposal procedures for batteries and sulfuric acid are observed.
NOTE:
-
In conjunction with "voltage under load" test, electrolyte density test gives a good indication of battery condition.
-
Electrolyte temperature must be at least 10 degrees C.
-
The electrolyte density can be checked immediately after battery charging.
Test sequence
-
Remove all battery plugs (battery cell sealing plugs).
-
Immerse hydrometer in one of the cells and draw in electrolyte until float is freely suspended in electrolyte.
-
The greater the specific density of electrolyte drawn in, the higher the float will sit.
-
The specific gravity in kg/cu.dm can be read off from the hydrometer scale.