A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
/Page-1184003.png)
-
Shift selector lever into "S" and carefully press up ball head of selector lever cable -1- on lever/shift rod -2- using a pair of pliers.
Note: Do not deform lever/shift rod when pressing up or else shifting cannot be precisely adjusted any more.
-
Rotate multi-function switch -3- until the alignment bore -4- at switch housing can be fitted on the alignment pin -2- at transmission housing.
-
Installing left transmission support.
Tightening Torque
