A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Hood Weatherstrip: Service and Repair
From Model Year 2006
Front hood seal (from model year 2006) - assembly overview
1
-
Gasket for lock carrier
-
Apply gasket at left and right on foam piece.
-
When doing this, make sure it is applied without gaps.
-
Compress excess length of gasket along lock carrier.
2
-
Left sealing profile
-
Self-adhering, adhesion surfaces must be free of dust and grease.
3
-
Gasket for plenum chamber
-
Apply gasket at left and right on foam piece.
-
When doing this, make sure it is applied without gaps.
-
Compress excess length of gasket along front panel of plenum chamber.