A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-4037002.png)
-
Remove bolts - 5 - at left and right.
-
Remove bolts - 4 - and pull lock carrier - 1 - toward front.
-
Pull lock carrier forward until rear hole in lock carrier aligns with front threaded hole in fender flange.
-
Secure lock carrier at left and right with bolts - arrow -.
Assembly is performed in the reverse order of removal.
Tightening torques => [ Lock Carrier with Attachments Assembly Overview ] See: Removal and Replacement/Lock Carrier With
Attachments Assembly Overview.
‹› After assembly of lock carrier, check headlight positioning and adjust if necessary.
