A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Convertible Top Deck Lid: Service and Repair
Convertible Top Compartment Cover, Removing and Installing
Convertible top compartment cover, removing and installing
1
-
Convertible top compartment cover seal
-
Begin installation at molded parts.
-
Install molded part along flange toward outside, not from above.
-
Install seal on both sides from inside toward outside.
2
-
Hydraulic cylinder
3
-
Ball head pin
-
21 Nm
4
-
Convertible top compartment cover
-
Removing:
-
Disengage push rod from hydraulic cylinders at ball stud.
-
Remove bolts on cover side of hinge.
-
Remove convertible top compartment cover.
5
-
Screw
-
8 Nm
6
-
Hold-down fastener
-
Remove convertible top compartment cover insulation.
-
Pull hold-down fastener out sideways and remove.
7
-
Screw
-
21 Nm
8
-
Tension plate
-
Striker pin is aligned to convertible top compartment cover latch.
-
It must align with latch housing on inside.
-
When closed, striker pin must have enough clearance in latch cover opening.
9
-
Window
10
-
Ball head pin
-
21 Nm