audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Body - Convertible Top Damage Prevention|Page 12390 > < Hydraulic Lines, Removing and Installing|Page 12385
Page 1
background image

Convertible Top Latch: Technical Service Bulletins
Body - Convertible Top Damage Prevention

61 08 09 

2014243/2 

December 1, 2008. 

Supersedes Technical Service Bulletin Group 61 number 07-05 dated March 8, 2007 for reasons listed below.

Affected Vehicles

61 Damage to the convertible top

Condition

Various damage to the convertible top caused by incorrect manual operation.

Technical Background 

The following are typical examples of top damage during manual operation and the likely causes.

Dislodged storage bay cover seal

While stowing the top in the storage bay, the loose seal prevents the tension bow from fully entering the storage bay. If additional pressure is applied to
the top mechanism downward, the convertible top frame is bent and the arm of the potentiometer (G356) is broken. In some cases the top fabric can tear
as shown in the photo.

Body - Convertible Top Damage Prevention|Page 12390 > < Hydraulic Lines, Removing and Installing|Page 12385