A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› Apply a thin coat of lithium grease (G 052 150 A2) before installing
3 - Brake caliper housing
4 - Self-locking bolts, 30 Nm
‹› Always replace
‹› Counter-hold on the guide pin when loosening and tightening
5 - Seal
‹› Removing and installing, refer to => [ Caliper Piston, C54 ] See: Overhaul/Front/Caliper Piston, C54.
6 - Piston
‹› Removing and installing, refer to => [ Caliper Piston, C54 ] See: Overhaul/Front/Caliper Piston, C54.
‹› Apply a thin coat of lithium grease (G 052 150 A2) to the piston
7 - Protective seal
‹› Do not damage when inserting piston
8 - Brake carrier with guide pins and protective caps
‹› Replacement carriers are supplied assembled and with sufficient grease on the guide pins