A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› Ignore - 1 -.
Installing
Installation is in reverse order of removal, noting the following:
‹› Replace O-rings.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Clean and/or smooth O-ring sealing surface before installing.
-
Moisten a new O-ring with coolant additive and slide it onto the coolant pipe.
-
Install A/C compressor.
-
Install ribbed belt. Refer to => [ Ribbed Belt ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed
Belt.
-
Install oil cooler. Refer to => [ Oil Cooler ] See: Engine/Engine Lubrication/Oil Cooler/Service and Repair/Oil Cooler.
-
Install lock carrier with attachments. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
-
Install front bumper cover.
-
Fill with coolant => [ Filling ] See: Service and Repair/Procedures.
Tightening Specifications