A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-874003.png)
CAUTION!
Wear safety glasses.
-
Using rotating plastic brush, remove any remaining sealant from cylinder head and guide frame.
CAUTION!
Make sure that no sealant residue enters the cylinder head and bearings.
-
Clean sealing surfaces, they must be free of oil and grease.
-
Oil journal surfaces of camshafts.
-
Place guide frame onto a soft surface on workbench.
-
Set camshafts into guide frame.
‹› The placement of camshafts must be exactly within the axial bearings - arrows - of the guide frame.
‹› The ends of the piston rings - 1 - and - 2 - must face upward or downward, and must never face sideways.
