A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Turn over guide frame with installed camshafts, thereby holding camshafts tight within the guide frame.
-
Rotate camshafts until threaded holes - arrows - point upward.
-
Check whether camshafts still lie exactly in axial bearings of guide frame.
-
Mount camshaft locating tool (T40070) as shown in the illustration and tighten bolts - arrows - to 20 Nm.
-
Cut tube nozzle at front marking (jet dia. approximately 1 mm).