A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove right cylinder head cover bolts in sequence - 12 to 1 -.
CAUTION!
Crankcase ventilation - arrow - must not be disconnected.
-
Lay aside removed cylinder head cover with connected crankcase ventilation hose.
Installing
Installation is in reverse order of removal, noting the following:
‹› Replace cylinder head cover gaskets if damaged.
‹› Replace bolts for cylinder head cover if gasket is damaged.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Tighten cylinder head cover in sequence - 1 to 12 -.
Tightening Specifications