A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Oil Filter Housing: Locations
Oil filter housing, component overview
Vehicles through 04.2005
1 - 13 Nm
2 - Oil pressure switch F1
^
Black insulation
^
Tighten to 20 Nm
3 - 13 Nm
4 - Sleeve
5 - Rubber grommet
6 - Oil filter housing
^
With filter by-pass valve 3.0 bar
^
With oil check valve
^
Oil check valve cannot be replaced
7 - O-ring
^
Replace
^
Inserting
8 - Cap, 25 Nm
9 - Seal
^
Replace
10 - Oil filter element
^
Remove from cap - 8 -
^
Replace O-ring - 7 - and sealing ring - 9 - when replacing filter
^
Note installation position
11 - Gasket