A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Installing
‹› During installation, all cable ties must be re-installed at the same location.
‹› Secure all hose connections with hose clamps appropriate for the model.
CAUTION!
Wear safety glasses.
-
Using e.g. a rotating plastic brush, remove sealant residue on covers for timing chain and on cylinder block and head.
CAUTION!
Make sure that no sealant residue enters the engine.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Cut tube nozzle at front marking (jet dia. approximately 1 mm).