A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Water Pump: Service and Repair
Coolant Pump
Special tools, testers and auxiliary items required
‹› Spanner Wrench (3212)
Removing
-
Remove front engine cover - arrows -.
-
Remove bolts - arrows -.
-
Remove air duct - 1 - and - 2 -.
-
Drain coolant. Refer to => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures.
-
Remove front bumper cover.
-
Bring lock carrier into service position. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
‹› Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the belt
under operating conditions.
-
Pivot tensioning device in direction of - arrow - to relieve tension on ribbed belt.