A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› Install on proper side (level side to compressor)
‹› Removing and installing, refer to => [ Compressor Belt Pulley, Version 1 ] See:
4 - Belt pulley
‹› Rubber element of pulley disengages when torque is too-high (e.g. compressor produces friction) and pulley runs freely without driving the
compressor.
‹› Different versions
‹› Removing and installing => [ Compressor Belt Pulley, Version 1 ] See:
‹› Under certain conditions (e.g. rough engine idle), rubber element of pulley can disengage without a malfunction existing at compressor or in
refrigerant circuit.
5 - Compressor
‹› Different versions are installed, depending on engine version and country version of vehicle.
‹› Clean compressor flange before sliding on pulley.