A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove A/C unit - A - towards passenger side.
‹› When removing the A/C unit, make sure the two coolant pipes to the heat exchanger do not get caught and bent on the plenum chamber or the
noise insulation mat.
‹› Observe wiring harness, individual electrical wiring connections may get damaged when pulling on harness.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Before installing, check all gaskets and seals on the A/C unit for damage and replace if necessary.
-
Check securing of coolant pipes to heat exchanger.
-
Connect coolant hoses properly to heater core. Observe markings: