A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Backup Lamp Switch: Service and Repair
02XA Transmission
Back-Up Lamp Switch
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
Removing
-
If equipped, loosen quick-release connectors - 3 - and remove rear noise insulation - B -.
-
Disconnect electrical harness connector - arrow - at Back-Up Light Switch (F4) at right on transmission.
-
Remove Back-Up Light Switch - arrow - from selector shaft cover.