A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Tail Lamp: Service and Repair
Side-Mounted Turn Signals
Side-Mounted Turn Signals
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Side-Mounted Turn Signals, Removing and Installing
Removing
-
Switch ignition off and remove ignition key.
-
Push side turn signal lamp against retaining tab - arrow - in driving direction and carefully remove from opening.
-
Remove housing for side turn signals from bulb socket.
Installing
Installation is the reverse of removal.