A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Fuse Block: Service and Repair
9-Position Relay Carrier
9-Position Relay Carrier
Removing
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
-
Where applicable, remove driver's storage compartment.
-
Remove nuts - 3 - remove Vehicle Electrical System Control Module (J519) with wires attached.
-
Remove 9-position relay carrier - 4 -.
‹› Disregard - 1 - and - 2 -.
-
Unclip the fuse carriers at the 9-position relay carrier.
-
Remove relays and control modules and then unclip appropriate relay carrier.
‹› Refer to the applicable wiring diagram for exact identification of connections on relay carrier => Wiring Diagrams.
Installing
Install in reverse order of removal, noting the following: