A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-2833003.png)
-
Close Pliers For Fiber Optic Conductor VAS 6223/1 until stop and keep closed.
-
Lift up stripping lever - arrow -.
-
Open cutting tool and remove fiber optic cable - 1 -.
-
Detach separated section of insulation from fiber optic cable.
Precision cutting (production of optical end face)
-
Slide fiber optic cable - 1 - into cutting point.
-
Insulation must make contact with cutting point stop - arrow -.
-
Close Pliers For Fiber Optic Conductor VAS 6223/1.
-
Press cutting unit - arrow - down.
-
Open Pliers For Fiber Optic Conductor VAS 6223/1 and remove fiber-optic cable - 1 -.
NOTE: Fiber optic cable is only to be placed on an absolutely clean surface.
