A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Display on (VAS 5051B):
A Output diagnostic test mode waiting, Advancing by switching required
1
Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
-
Press the -> button repeatedly, until leak detection pump for fuel system is activated.
‹› The sound of the leak detection pump running can be heard at the left rear wheel housing.
-
End function "005 - output Diagnostic Test Mode (DTM)" by pressing <- button.
-
Select diagnostic function "022 - End output" in selection.
-
Switch off ignition.
If Leak Detection Pump (LDP) for fuel system is not activated (no operating noise audible):
-
Remove leak detection pump (LDP) (V144), refer to => [ Leak Detection Pump ] See: Service and Repair and disconnect the electrical
connection.
Checking internal resistance
-
Connect hand multimeter (V.A.G 1526C) for resistance measurement as follows.