A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Variable Induction Position Sensor: Testing and Inspection
Intake Manifold Runner Position Sensor 2 G512, Checking
Intake Manifold Runner Position Sensor 2 G512, Checking
Special tools, testers and auxiliary items required
-
Multimeter.
-
Wiring diagram.
Test requirements
-
The Engine Control Module (ECM) J623 fuses OK.
-
The parking brake engaged.
-
The battery voltage at least 12.5 V.
-
The selector lever of automatic transmission in position "P" or "N".
-
All electrical consumers switched off (radiator fan must NOT run during test).
-
A/C switched off.
-
The fuel tank at least 1/4 filled.
-
The ignition switched off.
Procedure
-
Remove the rear engine cover - arrows -.
Checking voltage supply
NOTE: The Intake manifolds have been removed for clarity.
-
Disconnect the Intake Manifold Runner Position Sensor 2 G512 electrical harness connector - 1 -.
Switch the ignition on.