A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Direct the heat gun nozzle at the protective housing shear bolts.
-
Switch the heat gun on and heat the bolt for approximately 20 to 25 seconds.
-
Remove shear bolts with locking pliers - arrow -.
‹› The threads of both shear bolts - 3 - that are installed in the ECM are not coated with a locking compound. The threads in the ECM housing must
not be heated and do not require to be heated (unintentional heating of the ECM).