A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-3385006.png)
‹› Tightening specification 4 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
2
Cap Nut
‹› Tightening specification.
3
Retainers (Qty. 2)
4
Bolt (Qty. 1)
‹› Tightening specification 4 Nm
‹› self-locking
‹› replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
5
Bracket (Qty. 1)
‹› Removal:
-
Disconnect the battery ground (GND) strap.
