A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
1
Side Curtain Airbag Connector
2
Side Curtain Airbag
‹› Removal:
-
Disconnect the battery ground (GND) strap.
-
Remove sun visor. Refer to => [ Sun Visor ] .
-
Remove upper trim on A-pillar. Refer to => [ Upper A-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Service and Repair/Removal
and Replacement.
-
Remove D-pillar trim. Refer to => [ D-Pillar Trim, Removing and Installing ] .
-
Remove trim above rear door. Refer to => [ Trim above Rear Door, Removing and Installing ] .
-
To disconnect harness connector - 1 -, open fuse using a screwdriver.
-
Remove screw - 6 -.
-
Loosen four bolts - 7 -.
-
Remove screw - 5 -.
-
Place front part of side curtain airbag module on seats.
-
Loosen three bolts - 3 -.
-
Remove four bolts - 4 - and remove brackets - arrows - from roof frame.