A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Fold positive terminal cover - 2 - upward.
-
Then disconnect positive ( + ) terminal - 1 - from battery.
-
Disconnect central gas venting system hose - 7 -.
-
Remove bolt - 4 - from battery hold-down bracket - 3 -.
-
Remove battery from battery console retaining strip.
-
Remove battery from luggage compartment.
CAUTION!
When disposing batteries it is absolutely necessary that the disposal procedures for batteries and sulfuric acid are observed.
Installing
‹› Only maintenance-free batteries conforming to standards "TL82506 " (as of December 1997) and "VW75073" (as of August 2001) may be
installed.
‹› Batteries from the Audi Parts Program have a bottom strip-adapter for adapting to different grip channels. Whether and how bottom strip-adapter
is used, refer to operating instructions for battery.
-
Insert battery in battery holder.
‹› Battery clamping strip - 1 - must engage in battery holder mount - 2 -.
‹› It should no longer be possible to move the battery.
-
Position battery hold-down bracket - 3 -.