A4 Quattro Cabriolet V6-32L Alternator Pulley Removal and Installation | Page 7664
Alternator Pulley: Service and Repair
Ribbed Belt Pulley Without Freewheel, Removing And Installing
Ribbed Belt Pulley Without Freewheel, Removing And Installing Special Tools, Testers And Auxiliary Items Required
-
Socket 3310
-
8 mm hex socket or TORX T50
Removing
-
Remove generator.
-
If present, press the protective cap off the generator pulley.
-
Counterhold mounting nut using socket 3310 and rotate generator shaft clockwise to loosen it.
-
Remove ribbed belt pulley.
Installing
Install in reverse order of removal, observing the following:
-
Turn the generator shaft counterclockwise to tighten.
-
Clip protective cap onto generator pulley.
Tightening torque
Ribbed belt pulley to generator : 65 Nm