audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Wire Cross-Section 0.22 mm or 0.35 mm, Repairing|Page 8253 > < Wire Cross-Section 0.22 mm or 0.35 mm, Repairing|Page 8251

A4 Quattro Cabriolet V6-3.2L (BKH) (2007)

Page 3
background image

The following exchangeable heads are available for the Crimping Pliers (Base Tool) (VAS 1978/1-2):

‹› Exchangeable Head, 0.35-2.5mm (VAS 1978/1-1)

‹› Exchangeable head, 4.0-6.0 mm&sup2; (VAS 1978/2 A )

-

Slide crimp connection on to both stripped wire ends of vehicle-specific single wire and crimp them using crimp pliers.

‹› Do not crimp wire insulation.

After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.

Wire Cross-Section 0.22 mm or 0.35 mm, Repairing|Page 8253 > < Wire Cross-Section 0.22 mm or 0.35 mm, Repairing|Page 8251