A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-3028002.png)
Installation is reverse of removal, paying attention to the following:
-
Make sure that all 3 catches as well as the harness connector are engaged cleanly.
-
Connect battery. Required steps.
-
Zero the Steering Angle Sensor -G85-.
Do this using vehicle diagnostic, testing and information system VAS 5051.
Tightening torques
Trim for steering column switch : 1 Nm
Steering column switch module (SCSM) : 3 Nm
