A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-3113003.png)
-
Remove hex bolt - arrow - from suspension strut/control link.
-
Swing wheel bearing housing to side.
-
Loosen the coolant reservoir mount.
-
Remove plenum chamber cover.
-
Remove cover - arrow - of bolt.
-
Remove hex bolts - 1 - in the plenum chamber.
-
Take out suspension strut with mounting bracket.
Be careful not to damage CV boot in the process!
Installing
-
Insert suspension strut with mounting bracket into suspension turret. Tighten hex bolts - 1 -.
