A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Shift Cable: Procedures
Through VIN 8E_8A 002699
Selector Lever Cable, Bringing into Basic Setting
Special tools, testers and auxiliary items required
‹› Socket and key (T40031)
Procedure
‹› Tightening specifications. Refer to => [ Selector Lever Cable and Locking Cable Assembly Overview ] See: Shifter A/T/Service and
Repair/Removal and Replacement/09LA Transmission/Selector Lever Cable and Locking Cable Assembly Overview
-
Remove cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] See: Shifter A/T/Service and Repair/Removal and
Replacement/09LA Transmission/Selector Mechanism Cover.
-
Place selector lever in position "S".
‹› Before performing basic setting, make sure that the clamping screw is tightened. It is accessible through the hole in shift mechanism in position "
S" using socket and key (T40031).
-
In this position, tighten the clamping screw with the socket and key (T40031).
-
Place selector lever in position "P".
-
Remove the mounting bracket on the transmission - arrows -.