A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove bolts at transmission/driveshaft flange.
-
Press driveshaft - 2 - together with rear final drive. CV joints can be moved axially.
-
Tie driveshaft up and toward the side to the heat shield - arrow -.
-
Remove Universal Support (V.A.G 1359/2) from Engine/Transmission Jack (V.A.G 1383 A).
-
Position Engine/Transmission Jack (V.A.G 1383 A) thrust disc centered on lower frame boss - arrow - and support transmission from underneath.