A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1787001.png)
Shifter A/T: Removal and Replacement
Selector Mechanism Cover
Selector Mechanism Cover
Removing
-
Remove selector lever handle. Refer to => [ Selector Lever Handle ] See: Selector Lever Handle.
-
Open ashtray in center console and remove trim panel - arrows -.
-
Release all 4 clips - arrows - and pull cover - 1 - with guide upwards to remove.
-
Disconnect connector from the side of the guide plate.
Installing
Install in reverse order, paying attention to the following:
-
Install selector lever handle.
