A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
3
Boot for selector lever cable
‹› To be buttoned into selector mechanism bottom cover
4
Retaining clip
5
Ignition/starter switch
‹› With ignition key removal lock
6
Locking cable for the ignition key removal lock
‹› Not to be kinked
‹› Refer to => [ Locking Cable ] See: Shift Interlock/Shift Interlock Cable/Service and Repair/09LA Transmission
‹› Refer to => [ Locking Cable Adjusting ] See: Shift Interlock/Shift Interlock Cable/Adjustments/09LA Transmission/Locking Cable Adjusting
7
Hex head bolt - 9 Nm
8
Selector lever cable locking bolt - 13 Nm
‹› Loosen 1 turn for adjusting, do NOT remove completely
9
Selector lever cable screws
‹› To remove selector lever cable, move plastic retaining spring at selector mechanism forward slightly and put screws upward, only as far as
necessary.
10
Retaining clip
‹› For selector lever cable
‹› Replace
11
Mounting bracket
‹› For selector lever cable on transmission
12
Hex head bolt - 10 Nm