A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-1841002.png)
5 - Dual-mass flywheel
^
Ensure that dowel pins fit tightly
^
Contact surface for clutch lining must be free of grooves, oil and grease
^
Observe instructions for removal
6 - Needle bearing
Identification
Pressure plate with stop mechanism (position sensor) - arrow -.
Checking ends of diaphragm spring
^
Wear up to half the thickness of the diaphragm spring is permitted.
Note:
^
Important: When performing repairs, always select the correct clutch pressure plate and clutch plate by checking engine code.
Checking spring connection and rivet
-
Check spring connections - arrowsA - for damage and make sure riveted fastenings - arrowsB - are seated tightly.
Note:
