A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Guide clutch slave cylinder - 1 - into transmission housing mounting hole without great sideways movement from working direction of plunger -
arrow A -.
-
While doing this, insert into recess - arrow B - of clutch release lever - 3 -.
-
Tighten the clutch slave cylinder - 1 - with a new bolt - 2 -. Tightening specification => [ (Item 13) Internal hex bolt, 23 Nm ] See: Clutch Release
Bearing/Service and Repair/02XA Transmission.
‹› If the slave cylinder - 1 - is guided in angled, there is a risk that the plunger - arrow A - may be guided past the clutch release lever - 3 -.
CAUTION!